Wind and Solar Street Lighting, solar lamp posts

This Professional cutting edge wind and solar powered combined renewable energy technology is already in use in several European countries and in many other countries.

If you need to provide street lighting, wind and solar powered lamp posts, security lighting, or outdoor lighting and lower energy costs outside of daylight hours then you should be excited by this product we certainly are it combines two Photovoltaic Cell electricity generating panels with a Wind Turbine on each lampost feeding energy to a battery to power the light.

Whether your aim is to save money on street lighting costs, provide lighting for a compond or car park, campus or driveway then look no further.

In the first instance please e-mail details of your enquiry to us by following the 'contact us' link at the foot of this webpage. We will pass this onto the manufacturer because this saves you money.

Third Generation - from the latest technology.

A new concept in amenity lighting designed for the 21st Century providing illumination at almost any location remote from the grid electricity supply. It is an innovative, environmentally friendly and independent outdoor lighting system that is cost effective and simple to install almost anywhere.

It doesn’t rely on mains power, instead the wind turbine and/or the solar panels convert wind power and solar power into electrical energy which is stored in the battery at the battery house for use as required by the lamp. The lamp has been designed to maximize the efficient use of generated energy using energy-saving luminaries which are switched automatically by a light sensor.

It is intended for permanent installation and can be located in the remotest of sites since no mains services are required saving on installation costs, inconvenience and time. The design. incorporates a lockable enclosure for the battery and controller. The whole system is virtually maintenance free and there are NO daily running costs, the power is completely free and clean.

As suppliers of low cost renewable energy systems we have sourced this design to supply wind-pv hybrid systems for clients worldwide in a variety of applications. We are very proud to put these wind turbines into the market as we believe this is one of the best hybrid street lights available anywhere on this planet .

Features

Fully automatic operation, lights up when it gets dark

Easy to install manually, no lifting gear required

Vandal resistant lockable battery house secures battery and pcu

Built-in pcu maximizing battery life and protecting the whole from excessive charge and discharge

All accessories supplied for simple plug and play installation

The wind turbine rotor blades are manufactured by precision injection molding process to make blades of an exceptional consistency aerodynamically with mass distribution that ensures the rotors operate with nearly no noise performance and minimal vibration. The wind turbine has a very low start-up/cut-in wind speed, high wind energy coefficient, and is specially designed to prevent the blades from feathering by aero-dynamical effect

The wind turbine has an adapted high-quality permanent magnet and is specially designed to reduce the start-up alternator torque.

The wind turbine body is made from high-quality precision cast aluminum to enhance its strength and excellent finish. It is designed to cater for various working environments such as severe climate, sand or salt corrosive environment to marine. The working temperature varies from -30°C to 60°C

The finishing of the lamp post/pole consists of three layers:

1. hot-dip galvanized layer;
2. ethylene oxide coating;
3. powder/polyester coating;

It makes for unmatched power generating performance. It is not only a clean power source, but also a modern design.

Maintenance free long life sealed battery provides up to 6 days reserve power

System Components

400W wind turbine

50W/100W polycrystalline solar panel (optional)

400W power conditioning unit (pcu)

30W 200pcs leds white color street lamp

200Ahr/300Ahr/400Ahr deep-cycle battery

8m 3-layer-coating lamp pole

Weather-proof battery house


Applications

Conservation areas

Remote homes

Countryside roads

Developing countries

Caravan parks

Farm tracks, stables, yards

Car parks,

l Industrial buildings, airfields

Adaptable for other applications e.g. road sign illumination, harbourside lighting, shore based navigation lighting, and many more

Technical Specification

Descriptions
Wind turbine

Rated Output Power (W)
400

Max. Output Power (W)
450

Rated Wind Speed (m/s)
12.5

Rated Rotation Speed (rpm)
900

Start-Up Wind Speed (m/s)
2.3

Cut-In Wind Speed (m/s)
3

Rotor Diameter (m)
1.4

Blade Material
synthetic MC nylon & carbon fibre

Airfoil type
true foil

Governor System
aero elastic thrust

Governor Wind Speed (m/s)
60

Shut-Down Mechanism
electric control

Battery System (Volts)
12V/24V

Driving Type
direct driving

Utility Infertile Available?
no

Charge Controller?
included

Over-Speed Protection
yes

Low-Voltage Protection
yes

Over-Voltage Protection
yes

Weight (kg)
16

Solar Module
polycrystalline type

Max. Output Power
50Wp /100Wp

Voltage at Max. Power (Vmp)
17 ± 0.5

Current at Max. Power (Imp)
2.95 ± 0.20

Open-Circuit Voltage (Voc)
21.5 ± 0.5

Short-Circuit Current (Vsc)
3.25 ± 0.20

Dimensions (mm)
856 x 531 x 28 (D)

Weight (kg)
5.5

Street lamp
30W 200pcs leds white color

Deep-Cycle Battery
300Ahr / 400Ahr


As always we aim to supply products that are second to none and 'cut to the bone' on price.

Our competitors may not like this but our customers love it!

Please e-mail us for details. See below for the technical specification. Full information and prices are available on enquiry.

Please have a look at details of this product by clicking on the following link:Solar and Wind Powered combined Street Lighting

The four options for the solar/wind hybrids are:

A1. Solar and Wind energy combined street lighting system, Complete system breakdown list is as below:

Light source1: Energy Saving Lamp 65W( 4500 lumens)

1. Wind Turbine: 12V/400W

2. Solar and wind power supply controller 12V/400W

3. Solar Panel: 12V/50W, 2pcs

4. Brackets for solar panel and street head light to be assembled on the street lighting:

5. Battery: Gelled Solar Batteries,12V 200Ah/pc,

6. Power Casing to place batteries and controller: (Can be on the ground or under ground)

7. Galvanized Lighting Pole(including foundation): 11 Meters (Optional height: 8, 9, 10, 11 meters)

8. Cobra Head solar street lighting fixture

9. Solar Lighting Source: 12V DC 65watt energy saving lamps: E40, 2700K or 6500K with IC design (Optional light source: LED-600pcs, low pressure sodium lamp 55W, LVD lamp 80W etc.) 10. Inter-connection wire:

11. Timer & light sensor controller with LED and LCD display 12V/15A:



B2. Solar and Wind energy combined street lighting system, Complete system, the breakdown list for the quotation is as below:


Light source2: LED-600PCS lamp( 2400 lumens)


1. Wind Turbine: 12V/400W

2. Solar and wind power supply controller 12V/400W

3. Solar Panel: 12V/50W, 2pcs

4. Brackets for solar panel and street head light to be assembled on the street lighting

5. Battery: Gelled Solar Batteries,12V 200Ah/pc,

6. Power Casing to place batteries and controller: (Can be on the ground or under ground)

7. Galvanized Lighting Pole(including foundation): 11 Meters (Optional height: 8, 9, 10, 11 meters)

8. Cobra Head solar street lighting fixture

9. Solar Lighting Source: 12V DC LED-600PCS, White color:

10. Inter-connection wire:

11. Timer & light sensor controller with LED and LCD display 12V/15A:



C3. Solar and Wind energy combine street lighting system, Complete system, the breakdown list for the quotation is as below:



Light source3: Low Pressure Sodium Lamp 55W( 7400 lumens)



1. Wind Turbine: 24V/400W

2. Solar and wind power supply controller 24V/400W

3. Solar Panel: 12V/50W, 2pcs

4. Brackets for solar panel and street head light to be assembled on the street lighting:

5. Battery: Gelled Solar Batteries,12V/150Ah, 2pcs,

6. Power Casing to place batteries and controller: (Can be on the ground or under ground)

7. Galvanized Lighting Pole(including foundation): 11 Meters (Optional height: 8, 9, 10, 11 meters)

8. Cobra Head solar street lighting fixture

9. Solar Lighting Source: 24V DC 55watt low pressure sodium lamp,

10. Inter-connection wire:

11. Timer & light sensor controller with LED and LCD display 24V/15A:



D4. Solar and Wind energy combined street lighting system, Complete system, the breakdown list for the quotation is as below:


Light source4: LVD lamp 80W( 6400 lumens)



1. Wind Turbine: 24V/400W

2. Solar and wind power supply controller 24V/400W

3. Solar Panel: 12V/50W, 2pcs

4. Brackets for solar panel and street head light to be assembled on the street lighting:

5. Battery: Gelled Solar Batteries,12V/150Ah, 2pcs,

6. Power Casing to place batteries and controller: (Can be on the ground or under ground)

7. Galvanized Lighting Pole(including foundation): 11 Meters (Optional height: 8, 9, 10, 11 meters)

8. Cobra Head solar street lighting fixture

9. Solar Lighting Source: 24V DC 80W LVD lamp, (2700K, 4200K, 6400K for options) 10. Inter-connection wire:

11. Timer & light sensor controller with LED and LCD display 24V/15A:


Two lighting systems are designed into one combined system, if some days there is sunlight but no wind energy, the solar panel charges the battery. Similarly if some days there is wind energy but no sunlight, the wind turbine can power the battery. If both wind & solar energy is enough, both can charge the battery. The wind turbine continues to work around the clock supplying energy for the system.

The price is obviously subject to the number of units ordered and delivery address, please confirm to us which lamps* you prefer, so that we can calculate the total cost for your reference. As we have these units manufactured abroad any U.K import tax is the responsibility of the customer as is shipping from port of arrival here in the U.K. We can arrange shipping and customs clearance and quote a price inclusive to the U.k delivery address (Please confirm which option you require).


Discounts are available for quantity and we welcome each and every enquiry irrespective of size enabling a tailored quotation to be issued. Manufacturers end user guarantee basis.

As is the normal procedure for all orders we would require part payment in advance These items are manufactured to order. Lead time to be confirmed depending on number of units required. Due to being made to order, once ordered and payment received cancellation is not possible. In placing an order and making payment you are impliedly agreeing to this condition.

Any further questions or requirements, please let us know.

The units are designed for assembled plug and play. Installation instructions are provided.

We look forward to hearing from you soon.

We have recently added an exciting new range of Solar Street Lighting to our list of products. Full specifications and images of these attractive Lights can be downloaded utilizing the link below. The different specifications and images can be accessed using the ‘model code tab’ at the bottom of the Excel File.

Volume discounts are available and the minimum order quantities apply. Please e-mail us for your price tailored to your potential requirements and for shipping details.

This is a large file so please allow a couple of minutes to download.

Essentialspark_Solar_ Street_ Light Product range downloadable file.

Solar and Wind Powered combined Street Lighting