The 200W wind turbine is supplied as a complete kit. The only other things you will need to install this unit are: a set of deep cycle batteries (which we can supply, if required) and cement for the foundations.
The following items make up the 200W wind turbine kit:
BOX 1:
3 section tower, labelled upper, middle and lower (each 1.3m long):
Tail-section including 6 bolts for fin;
3 blades;
BOX2:
Footing for the tower, including pivot bolt;
Wind turbine body including cabling and bolt for tail;
Blade hub with 6 bolts and restraining pieces Fin;
A nose cone;
3 catenary wire pieces for stays;
6 U bolts to secure catenary wire;
2 round spikes for securing footing;
3 angled pegs to secure catenary wire to ground;
3 turnbuckles with hook and eye ends;
BOX 3:
A combined regulator and dump load with air circulation fan
Charge controller showl with lid removed to show the internal dump load heater element
